Grizzly 660 Oil filters - Grizzly Riders - Yamaha Grizzly ATV Forum

Grizzly Tech Tips Share tips on services, repairs, etc here

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 11 (permalink) Old 06-05-2010, 10:22 PM Thread Starter
Member
 
rob350's Avatar
 
Join Date: Jan 2010
Location: Alberta
Posts: 957

Thanks: 123
Thanked 269 Times in 145 Posts
Grizzly 660 Oil filters


I got this list off Nyroc's website.

Quote:
These Oil Filters have 20 x 1.5mm threads, 14 psi by-pass valve, anti-drain back valve, 2.3" O.D. gasket 2.5" to 3.5" long. If you have the room, I recommend the longer filters.
Quote:
Motorcycle Filters (not recommended)
Yamaha: 5GH-13440-00-00
Purlator: ML16817
Fram: PH6017A
NAPA: 1358
WIX: 51358
AC: 2057
AMSOIL: SMF-103

Recommended Filters - about 2.5 inches long.
Purolator Pure One: PL14612
Mobil: M1-108
Bosch: 3300

Recommended Filters - about 3.25 inches long.
Purolator Pure One: PL14610
Mobil: 1 M1-110
Bosch: 3323
WalMart SuperTech: ST7317
I would like to add that I am currently using a LF240 Hastings filter (longer than OEM).
LF113 (2 5/8" OEM Length )
LF240 (3 1/2" Length)


Sticky the thread?

660 Grizz! Green DUH!



Last edited by rob350; 06-06-2010 at 02:13 AM.
rob350 is offline  
The Following User Says Thank You to rob350 For This Useful Post:
grizzly4hunting (06-06-2010)
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 06-06-2010, 12:20 AM
Member
 
kd2griz's Avatar
 
Join Date: May 2010
Location: Madison, WI
Posts: 179

Thanks: 18
Thanked 24 Times in 20 Posts
I never knew you could use longer filters.
Look like my grizz will be getting a fram filter next time.

02 Grizzly 660 Green warn winch, 26" 589s and 29.5" Outlaws
Uni, Hmf utility slip on, dyno jet kit.
Machined clutch sheave, 14 gram greaseless weights, and 2mm shim.
kd2griz is offline  
post #3 of 11 (permalink) Old 06-06-2010, 02:16 AM Thread Starter
Member
 
rob350's Avatar
 
Join Date: Jan 2010
Location: Alberta
Posts: 957

Thanks: 123
Thanked 269 Times in 145 Posts
Quote:
Originally Posted by kd2griz View Post
I never knew you could use longer filters.
Look like my grizz will be getting a fram filter next time.
The longer filter fits fine, and being that it sticks out a bit more it will make it easier to remove also.
Its usually always a good idea to use the biggest filter that is available.

660 Grizz! Green DUH!


rob350 is offline  
post #4 of 11 (permalink) Old 06-06-2010, 02:43 AM
PORN STARR
League of Extraordinary Grizzlymen
Turning Wrenches is Fun!
Site Supporter
 
El Dee's Avatar
 
Join Date: Jan 2010
Location: DIXIE
Posts: 1,159
Thanks: 549
Thanked 446 Times in 311 Posts
The evel one

X2, The bigger the filter the more crud it can capture. Excellent info Rob. I'm currently running a K/N but believe I could do better...I like the welded nut on there though...I'm just sayin"

"07 SIXX SIXXXTY, FULL HMF UTILITY, DYNO-JET KIT, UNI A/F, EHS AIRBOX MOD, DYNATEK IGNITION, BLACK ITP SS 108 WHEELS, 28 ZILLAS, GRUNT CLUTCH KIT W/2MM SHIM, LEED ENGINEERING HITCH
El Dee is offline  
post #5 of 11 (permalink) Old 06-06-2010, 07:54 AM
Always wrenching on toys
Site Supporter
 
swdockter's Avatar
 
Join Date: Dec 2009
Location: northwest burbs, il
Posts: 283

Thanks: 43
Thanked 46 Times in 38 Posts
I'm using the Mobil 1 M1-110 filter. I go to Advanced Auto and get the 5 quarts and filter for $29.99. Only one time did they allow me to buy the 4T M1 oil though

kd2griz, just go to Wallyworld and get the SuperTech filter. They are better than Fram - IMO. Fram filters have gotten a horrible reputation in the auto industry so I stay away from them.

Scott
02 660, ITP T7 Beadlocks on 26" OP Bighorns, Greaselss, UTVCrap Machined Sheave, DynoJet Kit, #45 pilot, Diz's K&N mod, 2" tip w/o sparky, OMI, M1 synthetic down every orifice
swdockter is offline  
post #6 of 11 (permalink) Old 06-06-2010, 09:06 AM
Federally lic Gun Dealer
Grizzly Roll Over Club
League of Extraordinary Grizzlymen
PM me for help!
 
The ModFather's Avatar
 
Join Date: Jul 2009
Location: The Jersey Shore
Posts: 4,590

Thanks: 1,014
Thanked 1,831 Times in 1,121 Posts
Send a message via AIM to The ModFather
I am running the Baldwin B1431 oil filter with my homemade magnet mod. because I wanted a longer
filter to help cool the oil, and to trap more dirt.

The standard Yamaha filter for the 660 is 2-5/8 long - The Baldwin B1431 is 4 inches overall

It is VERY IMPORTANT that any filter you use have the following:
Anti-Drainback Valve
14 PSID By-Pass Valve

The original Yamaha filter has both the anti drainback valve and the bypass valve - MANY aftermarket filters do no, so beware when replacing you filter with an aftermarket - JMO



Some people think outside the box - I Live There!
Sarcasm - it's just one more service I offer.
Grizzly of the Month: June,2010

God is Great, Beer is Good and People are Crazy!

If you want to see my bike - Please visit: MY Garage

Last edited by The ModFather; 06-08-2010 at 11:19 PM.
The ModFather is offline  
post #7 of 11 (permalink) Old 06-06-2010, 09:13 PM
Member
 
Bent/Bolt's Avatar
 
Join Date: May 2010
Location: New Castle De./Marion Heights Pa.
Posts: 23

Thanks: 7
Thanked 3 Times in 3 Posts
Thanks for tho filter brand #s
Bent/Bolt is offline  
post #8 of 11 (permalink) Old 06-08-2010, 10:31 PM
Member
 
kd2griz's Avatar
 
Join Date: May 2010
Location: Madison, WI
Posts: 179

Thanks: 18
Thanked 24 Times in 20 Posts
Quote:
Originally Posted by swdockter View Post
I'm using the Mobil 1 M1-110 filter. I go to Advanced Auto and get the 5 quarts and filter for $29.99. Only one time did they allow me to buy the 4T M1 oil though

kd2griz, just go to Wallyworld and get the SuperTech filter. They are better than Fram - IMO. Fram filters have gotten a horrible reputation in the auto industry so I stay away from them.
Thanks for the tip swdockter. I just bought M1-110 for the grizz.
I found out that the Mobil, bosch, and Super Tech filter are all made by champion. Here is the site Motorcycle Oil and Filters
And the Mobil a has better filter according to this site. Motorcycle Oil Filters & Air Filters

And Thanks Gunny for posting this info on a different thread.

02 Grizzly 660 Green warn winch, 26" 589s and 29.5" Outlaws
Uni, Hmf utility slip on, dyno jet kit.
Machined clutch sheave, 14 gram greaseless weights, and 2mm shim.
kd2griz is offline  
post #9 of 11 (permalink) Old 06-16-2010, 10:29 PM
Somewhere in the dust....
Member
 
MaineGrizzlyRider's Avatar
 
Join Date: May 2010
Location: San Antonio, TX but Maine is home
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
I use amsoil in my grizz, but I use the K&N filter, because the nut on the end is really conveinent. and I just like em'

2006 Yamaha Grizzly 660;
26" ITP Mud Lite XTR on Type 7 rims,
AMSOIL fluids throughout / engine oil/diff oil
Engine Ice coolant
AMR racing ignition coil
Reverse limiter cancel switch
K&N Air filter and Precharger,
Custom Aluminum CV guards,
2500LB Warn Winch
Cabelas Seclusion 3d Back seat/bag
Ice Auger Front carrier
Custom Hitch.
MaineGrizzlyRider is offline  
post #10 of 11 (permalink) Old 06-17-2010, 08:20 AM
Power Freak
Member
 
Mack450's Avatar
 
Join Date: May 2009
Location: Upstate NY
Posts: 1,600

Thanks: 78
Thanked 241 Times in 171 Posts
Send a message via AIM to Mack450
Thats a cool idea man. I will that.

kd2griz, dont use fram. They are JUNK.



Got Grizzly Riders Stickers?


2004 Grizzly 660 - Maxxis big horns and a few other things

2006 Kawasaki Brute Force 1000M
Mack450 is offline  
Reply

Bookmarks

Tags
660, filters, grizzly, oil

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Grizzly Riders - Yamaha Grizzly ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome